Hotline: 903-483-7995|E-Mail: info@wagner-tuning.com
We proudly present our advanced display for BMW G8X-Series. This innovative display provides you access to all essential vehicle data. Yes, we mean all relevant information. Our display reads this data directly through the Can-Bus protocol and displays it on our reliable MFD28 display. The BMW G8X-Series display is designed to seamlessly fit into your vehicle's cockpit and comes with a custom-made bezel that blends perfectly with the original design.
The specially adapted Can-Bus protocol was developed to ensure the fastest query speed possible.
Access to All Vehicle Data: We provide a pre-configured TRI file for your display by default. It lists all queryable sensors, including:
Temperatures: Engine coolant temperature, intake air temperature, exhaust gas temperature, transmission temperature.
Pressures: Boost pressure, ambient pressure, oil pressure.
Lambda/Fuel Mixture: Lambda setpoint/actual value, short-term lambda adaptation, long-term lambda adaptation, MAF (Mass Air Flow) sensor, engine load, torque.
Driver Dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position.
Others: Engine speed, total ignition angle, gear, battery voltage, ignition angle correction per cylinder.
Analog Inputs: You can add additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust gas temperature, and more, as well as an ethanol sensor for flex-fuel applications.
Please note that not every engine provides all of these data.
The display frame is suitable for all BMW G8x models, including M models, 2 series, 3 series, 4 series. A version for right-hand drive (RHD) is also available.
Each package includes:
You can connect various sensors through the four analog inputs - both linear 0-5V and NTC sensors are supported.
Our in-house CANchecked Dsiplay sensors are already integrated into the TRI/TRX files and only need to be connected:
In addition to analog sensors, you can also directly connect our external flash module with 8 LEDs. It can blink in various colors to indicate rev limits, and the colors can be conveniently configured through the display.
The ethanol sensor is connected directly to the display. A pull-up resistor (10K) between 5V and signal is required. Afterward, you can read and log ethanol content and temperature directly on the display.
With the Math Channels, you can link sensor data together. User Tables allow creating additional sensors with 2D or 3D maps.
We provide an illustrated installation guide to ensure a hassle-free installation process.
Unleash the full potential of your BMW G8X-Series with our state-of-the-art display. If you have any questions or need further information, we are at your service.
We proudly present our advanced display for BMW G8X-Series. This innovative display provides you access to all essential vehicle data. Yes, we mean all relevant information. Our display reads this data directly through the Can-Bus protocol and displays it on our reliable MFD28 display. The BMW G8X-Series display is designed to seamlessly fit into your vehicle's cockpit and comes with a custom-made bezel that blends perfectly with the original design.
The specially adapted Can-Bus protocol was developed to ensure the fastest query speed possible.
Access to All Vehicle Data: We provide a pre-configured TRI file for your display by default. It lists all queryable sensors, including:
Temperatures: Engine coolant temperature, intake air temperature, exhaust gas temperature, transmission temperature.
Pressures: Boost pressure, ambient pressure, oil pressure.
Lambda/Fuel Mixture: Lambda setpoint/actual value, short-term lambda adaptation, long-term lambda adaptation, MAF (Mass Air Flow) sensor, engine load, torque.
Driver Dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position.
Others: Engine speed, total ignition angle, gear, battery voltage, ignition angle correction per cylinder.
Analog Inputs: You can add additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust gas temperature, and more, as well as an ethanol sensor for flex-fuel applications.
Please note that not every engine provides all of these data.
The display frame is suitable for all BMW G8x models, including M models, 2 series, 3 series, 4 series. A version for right-hand drive (RHD) is also available.
Each package includes:
You can connect various sensors through the four analog inputs - both linear 0-5V and NTC sensors are supported.
Our in-house CANchecked Dsiplay sensors are already integrated into the TRI/TRX files and only need to be connected:
In addition to analog sensors, you can also directly connect our external flash module with 8 LEDs. It can blink in various colors to indicate rev limits, and the colors can be conveniently configured through the display.
The ethanol sensor is connected directly to the display. A pull-up resistor (10K) between 5V and signal is required. Afterward, you can read and log ethanol content and temperature directly on the display.
With the Math Channels, you can link sensor data together. User Tables allow creating additional sensors with 2D or 3D maps.
We provide an illustrated installation guide to ensure a hassle-free installation process.
Unleash the full potential of your BMW G8X-Series with our state-of-the-art display. If you have any questions or need further information, we are at your service.
