We are excited to introduce our state-of-the-art display for Ford Bronco models. This groundbreaking display provides you with comprehensive access to all crucial vehicle data. We mean all relevant information, truly. Our display reads these data directly through the Can-Bus protocol and presents them on our reliable MFD28 display. The Ford Bronco Display seamlessly integrates into your vehicle's design and comes with a custom-made bezel that perfectly complements the aesthetics.
The specially adapted Can-Bus protocol has been developed with the utmost precision to ensure the fastest query speed possible.
Access to All Vehicle Data: We provide a pre-configured TRI file for your display by default. Here are all the queryable sensors listed, including:
Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature, rear differential temperature, 4x tire temperature.
Pressures: Boost pressure, ambient pressure, oil pressure, 4x tire pressure.
Lambda/Fuel Mixture: Lambda target/actual value, short-term lambda adaptation, long-term lambda adaptation, MAF (mass air flow meter), engine load, torque.
Driver Dynamics: Brake pressure, vehicle speed, throttle angle/pedal position.
Others: RPM, total ignition timing, gear, battery voltage.
Analog Inputs: You can add additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust temperature, and more, as well as an ethanol sensor for flex-fuel applications.
Please note that not every engine provides all of this data.
The display frame fits all Ford Bronco models up from 2021.
Each delivery includes:
You can connect various sensors via the four analog inputs - both linear 0-5V and NTC sensors are supported.
Our in-house Wagner Tuning Dsiplay sensors are already integrated into the TRI/TRX files and only need to be connected:
In addition to the analog sensors, you can also directly connect our external flash module with 8 LEDs. It can flash in different colors to indicate rpm limits, and the colors can be conveniently configured through the display.
The ethanol sensor can be connected directly to the display. A pull-up resistor (10K) between 5V and signal is required. Afterwards, you can read and log ethanol content directly on the display.
With Math Channels, you can link sensor data together. User Tables allow you to create additional sensors with 2D or 3D maps.
We provide an illustrated installation guide to facilitate a seamless installation.
Unlock the full potential of your Ford Bronco with our advanced display. If you have any questions or need further information, we are here to assist you.
We are excited to introduce our state-of-the-art display for Ford Bronco models. This groundbreaking display provides you with comprehensive access to all crucial vehicle data. We mean all relevant information, truly. Our display reads these data directly through the Can-Bus protocol and presents them on our reliable MFD28 display. The Ford Bronco Display seamlessly integrates into your vehicle's design and comes with a custom-made bezel that perfectly complements the aesthetics.
The specially adapted Can-Bus protocol has been developed with the utmost precision to ensure the fastest query speed possible.
Access to All Vehicle Data: We provide a pre-configured TRI file for your display by default. Here are all the queryable sensors listed, including:
Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature, rear differential temperature, 4x tire temperature.
Pressures: Boost pressure, ambient pressure, oil pressure, 4x tire pressure.
Lambda/Fuel Mixture: Lambda target/actual value, short-term lambda adaptation, long-term lambda adaptation, MAF (mass air flow meter), engine load, torque.
Driver Dynamics: Brake pressure, vehicle speed, throttle angle/pedal position.
Others: RPM, total ignition timing, gear, battery voltage.
Analog Inputs: You can add additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust temperature, and more, as well as an ethanol sensor for flex-fuel applications.
Please note that not every engine provides all of this data.
The display frame fits all Ford Bronco models up from 2021.
Each delivery includes:
You can connect various sensors via the four analog inputs - both linear 0-5V and NTC sensors are supported.
Our in-house Wagner Tuning Dsiplay sensors are already integrated into the TRI/TRX files and only need to be connected:
In addition to the analog sensors, you can also directly connect our external flash module with 8 LEDs. It can flash in different colors to indicate rpm limits, and the colors can be conveniently configured through the display.
The ethanol sensor can be connected directly to the display. A pull-up resistor (10K) between 5V and signal is required. Afterwards, you can read and log ethanol content directly on the display.
With Math Channels, you can link sensor data together. User Tables allow you to create additional sensors with 2D or 3D maps.
We provide an illustrated installation guide to facilitate a seamless installation.
Unlock the full potential of your Ford Bronco with our advanced display. If you have any questions or need further information, we are here to assist you.